Small Parts Fully Threaded Rod, 18-8 Stainless Steel, Metric, M2-0.4 Threads, 100cm Overall Length

Threaded Rods and Studs are intended for situations when fast assembly and disassembly are required. Studs are generally shorter in length than Threaded Rods. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Threaded Rods and Studs allow for fast assembly and disassembly
• Stainless Steel is suitable where formability and cost are important considerations
• Similar to a bolt, but does not have a head
• Studs are generally shorter in length than Threaded Rods
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads