EPXX702 2" 52mm 10 Colors Led Backlights Smoke Face Water Temp Gauge Water Temperature Meter with Sensor with Pod Holder

EPMAN Racing Sport Car 2" 52mm 10 Colors Backlights Water Temp Temperature Gauge Meter with Sensor + Black Pod Holder EPXX702 Current: IGN MAX 0.3A ILM 0.3A Power: DC(10-15V) 12V Professional Reading range: 20~120℃ Sensor Thread Size : 1/8" NPT LED super Color: 7 Color display+3 Light Color Package includes: 1xWater Temperature Gauge 1x52mm Black Gauge Pod Holder 1xMeter Wire 1xPower Supply Wire 1xTemperature Sensor 1xDouble Sided Tape 2xBuffer 1xEnglish Manual Features: 2" (52mm) diameter gauge Black dial face when ignition is off 10 colors backlights can be selected, and it can memory the setting in the both daytime and night mode Brightness can be selected in 6 different levels, and it can memory the setting in the both daytime and night mode 3 buzzer types can be selected (slowly →fast→all the time) 4 buzzer levels can be selected. (silence →resounding) 5 Varations open ceremonies can be selected A warning value (arbitrary) can be set and the warning buzzer can be selected from three variations or turn off Data obtained during driving (top value and warning value) can be stored up, and the top value can be reviewed and cleared Flat glass,high-definition scale and long,narrow pointer provides accurate indication and high visibility Brushless stepping motor is used to enable a smooth, instantaneous response to high performance sport driving Common Button Operation: 1.There is a button in the backside of the gauge.They are used to review and clear top value,change the colors, adjust the brightness, choose the buzzer, set the warning etc. 2.Short press to switch between different functions settings,long press until buzzer sounds, then enter the setting mode.It will return to normal status when the button is released after 5 seconds Pod holder can be position on your dash,any little flat surface, use as a starter mold for your fiberglass